Clipper On Line • Ver Tópico - ERROR CODES

ERROR CODES

Aqui você poderá oferecer suas Contribuições, Dicas e Tutoriais (Texto ou Vídeo) que sejam de interesse de todos.

Moderador: Moderadores

 

ERROR CODES

Mensagempor Dudu_XBase » 09 Mai 2007 01:21

0 NO_ERROR
No error occurred.

1 ERROR_INVALID_FUNCTION
Invalid function number.

2 ERROR_FILE_NOT_FOUND
File not found.

3 ERROR_PATH_NOT_FOUND
Path not found.

4 ERROR_TOO_MANY_OPEN_FILES
Too many open files (no handles left).

5 ERROR_ACCESS_DENIED
Access denied.

6 ERROR_INVALID_HANDLE
Invalid handle.

7 ERROR_ARENA_TRASHED
Memory control blocks destroyed.

8 ERROR_NOT_ENOUGH_MEMORY
Insufficient memory.

9 ERROR_INVALID_BLOCK
Invalid memory-block address.

10 ERROR_BAD_ENVIRONMENT
Invalid environment.

11 ERROR_BAD_FORMAT
Invalid format.

12 ERROR_INVALID_ACCESS
Invalid access code.

13 ERROR_INVALID_DATA
Invalid data.

14 Reserved.


15 ERROR_INVALID_DRIVE
Invalid drive specified.

16 ERROR_CURRENT_DIRECTORY
Attempting to remove current directory.

17 ERROR_NOT_SAME_DEVICE
Not same device.

18 ERROR_NO_MORE_FILES
No more files.

19 ERROR_WRITE_PROTECT
Attempt to write on write-protected diskette.

20 ERROR_BAD_UNIT
Unknown unit.

21 ERROR_NOT_READY
Drive not ready.

22 ERROR_BAD_COMMAND
Unknown command.

23 ERROR_CRC
Data error - cyclic redundancy check.

24 ERROR_BAD_LENGTH
Invalid request structure length.

25 ERROR_SEEK
Seek error.

26 ERROR_NOT_DOS_DISK
Unknown media type.

27 ERROR_SECTOR_NOT_FOUND
Sector not found.

28 ERROR_OUT_OF_PAPER
Printer is out of paper.

29 ERROR_WRITE FAULT
Write fault.

30 ERROR_READ_FAULT
Read fault.

31 ERROR_GEN_FAILURE
General failure.

32 ERROR_SHARING_VIOLATION
Sharing violation.

33 ERROR_LOCK_VIOLATION
Lock violation.

34 ERROR_WRONG_DISK
Invalid disk change.

35 ERROR_FCB_UNAVAILABLE
FCB unavailable.

36 ERROR_SHARING_BUFFER_EXCEEDED
Sharing buffer overflow.

37 ERROR_CODE_PAGE_MISMATCHED
Code page does not match.

38 ERROR_HANDLE_EOF
End of file reached.

39 ERROR_HANDLE_DISK_FULL
Disk is full.

40-49 Reserved.


50 ERROR_NOT_SUPPORTED
Network request not supported.

51 ERROR_REM_NOT_LIST
Remote network node is not online.

52 ERROR_DUP_NAME
Duplicate file name in network.

53 ERROR_BAD_NETPATH
Network path not found.

54 ERROR_NETWORK_BUSY
Network is busy.

55 ERROR_DEV_NOT_EXIST
Device is not installed in network.

56 ERROR_TOO_MANY_CMDS
Network command limit reached.

57 ERROR_ADAP_HDW_ERR
Network adapter hardware error.

58 ERROR_BAD_NET_RESP
Incorrect response in network.

59 ERROR_UNEXP_NET_ERR
Unexpected error in network.

60 ERROR_BAD_REM_ADAP
Remote network adapter error.

61 ERROR_PRINTQ_FULL
Network printer queue is full.

62 ERROR_NO_SPOOL_SPACE
No space in print spool file.

63 ERROR_PRINT_CANCELLED
Print spool file deleted.

64 ERROR_NETNAME_DELETED
Network name deleted.

65 ERROR_NETWORK_ACCESS_DENIED
Access to network denied.

66 ERROR_BAD_DEV_TYPE
Device type invalid for network.

67 ERROR_BAD_NET_NAME
Network name not found.

68 ERROR_TOO_MANY_NAMES
Network name limit exceeded.

69 ERROR_TOO_MANY_SESS
Network session limit exceeded.

70 ERROR_SHARING_PAUSED
Temporary pause in network.

71 ERROR_REQ_NOT_ACCEP
Network request denied.

72 ERROR_REDIR_PAUSED
Pause in network print disk redirection.

73 ERROR_SBCS_ATT_WRITE_PROT
Attempted write on protected disk.

74 ERROR_SBCS_GENERAL_FAILURE
General failure, single-byte character set.

75-79 Reserved.


80 ERROR_FILE_EXISTS
File exists.

81 ERROR_DUP_FCB
Reserved.

82 ERROR_CANNOT_MAKE
Cannot make directory entry.

83 ERROR_FAIL_I24
Failure on INT 24.

84 ERROR_OUT_OF_STRUCTURES
Too many redirections.

85 ERROR_ALREADY_ASSIGNED
Duplicate redirection.

86 ERROR_INVALID_PASSWORD
Invalid password.

87 ERROR_INVALID_PARAMETER
Invalid parameter.

88 ERROR_NET_WRITE_FAULT
Network device fault.

89 ERROR_NO_PROC_SLOTS
No process slots available.

90 ERROR_NOT_FROZEN
System error.

91 ERR_TSTOVFL
Timer service table overflow.

92 ERR_TSTDUP
Timer service table duplicate.

93 ERROR_NO_ITEMS
No items to work on.

95 ERROR_INTERRUPT
Interrupted system call.

99 ERROR_DEVICE_IN_USE
Device in use.

100 ERROR_TOO_MANY_SEMAPHORES
User/system open semaphore limit reached.

101 ERROR_EXCL_SEM_ALREADY_OWNED
Exclusive semaphore already owned.

102 ERROR_SEM_IS_SET
DosCloseSem found semaphore set.

103 ERROR_TOO_MANY_SEM_REQUESTS
Too many exclusive semaphore requests.

104 ERROR_INVALID_AT_INTERRUPT_TIME
Operation invalid at interrupt time.

105 ERROR_SEM_OWNER_DIED
Previous semaphore owner terminated without freeing semaphore.

106 ERROR_SEM_USER_LIMIT
Semaphore limit exceeded.

107 ERROR_DISK_CHANGE
Insert drive B disk into drive A.

108 ERROR_DRIVE_LOCKED
Drive locked by another process.

109 ERROR_BROKEN_PIPE
Write on pipe with no reader.

110 ERROR_OPEN_FAILED
Open/create failed due to explicit fail command.

111 ERROR_BUFFER_OVERFLOW
Buffer passed to system call too small to hold return data.

112 ERROR_DISK_FULL
Not enough space on the disk.

113 ERROR_NO_MORE_SEARCH_HANDLES
Cannot allocate another search structure and handle.

114 ERROR_INVALID_TARGET_HANDLE
Target handle in DosDupHandle invalid.

115 ERROR_PROTECTION_VIOLATION
Invalid user virtual address.

116 ERROR_VIOKBD_REQUEST
Error on display write or keyboard read.

117 ERROR_INVALID_CATEGORY
Category for DevIOCtl not defined.

118 ERROR_INVALID_VERIFY_SWITCH
Invalid value passed for verify flag.

119 ERROR_BAD_DRIVER_LEVEL
Level four driver not found.

120 ERROR_CALL_NOT_IMPLEMENTED
Invalid function called.

121 ERROR_SEM_TIMEOUT
Time-out occurred from semaphore API function.

122 ERROR_INSUFFICIENT_BUFFER
Data buffer too small.

123 ERROR_INVALID_NAME
Illegal character or invalid file-system name.

124 ERROR_INVALID_LEVEL
Non-implemented level for information retrieval or setting.

125 ERROR_NO_VOLUME_LABEL
No volume label found with DosQueryFSInfo function.

126 ERROR_MOD_NOT_FOUND
Module handle not found with DosQueryProcAddr(),
DosQueryModAddr().

127 ERROR_PROC_NOT_FOUND
Procedure address not found with DosQueryProcAddr().

128 ERROR_WAIT_NO_CHILDREN
DosWaitChild finds no children.

129 ERROR_CHILD_NOT_COMPLETE
DosWaitChild children not terminated.

130 ERROR_DIRECT_ACCESS_HANDLE
Handle operation invalid for direct disk-access handles.

131 ERROR_NEGATIVE_SEEK
Attempting seek to negative offset.

132 ERROR_SEEK_ON_DEVICE
Application trying to seek on device or pipe.

133 ERROR_IS_JOIN_TARGET
Drive has previously joined drives.

134 ERROR_IS_JOINED
Drive is already joined.

135 ERROR_IS_SUBSTED
Drive is already substituted.

136 ERROR_NOT_JOINED
Cannot delete drive that is not joined.

137 ERROR_NOT_SUBSTED
Cannot delete drive that is not substituted.

138 ERROR_JOIN_TO_JOIN
Cannot join to a joined drive.

139 ERROR_SUBST_TO_SUBST
Cannot substitute to a substituted drive.

140 ERROR_JOIN_TO_SUBST
Cannot join to a substituted drive.

141 ERROR_SUBST_TO_JOIN
Cannot substitute to a joined drive.

142 ERROR_BUSY_DRIVE
Specified drive is busy.

143 ERROR_SAME_DRIVE
Cannot join or substitute a drive to a directory on the same drive.

144 ERROR_DIR_NOT_ROOT
Directory must be a subdirectory of the root.

145 ERROR_DIR_NOT_EMPTY
Directory must be empty to use join command.

146 ERROR_IS_SUBST_PATH
Path specified is being used in a substitute.

147 ERROR_IS_JOIN_PATH
Path specified is being used in a join.

148 ERROR_PATH_BUSY
Path specified is being used by another process.

149 ERROR_IS_SUBST_TARGET
Cannot join or substitute a drive that has a directory that is the
target of a previous substitute.

150 ERROR_SYSTEM_TRACE
System trace error.

151 ERROR_INVALID_EVENT_COUNT
DosWaitMuxWaitSem errors.

152 ERROR_TOO_MANY_MUXWAITERS
System limit of 100 entries reached.

153 ERROR_INVALID_LIST_FORMAT
Invalid list format.

154 ERROR_LABEL_TOO_LONG
Volume label too big.

155 ERROR_TOO_MANY_TCBS
Cannot create another TCB.

156 ERROR_SIGNAL_REFUSED
Signal refused.

157 ERROR_DISCARDED
Segment is discarded.

158 ERROR_NOT_LOCKED
Segment is not locked.

159 ERROR_BAD_THREADID_ADDR
Invalid thread-identity address.

160 ERROR_BAD_ARGUMENTS
Invalid environment pointer.

161 ERROR_BAD_PATHNAME
Invalid path name passed to exec.

162 ERROR_SIGNAL_PENDING
Signal already pending.

163 ERROR_UNCERTAIN_MEDIA
Error with INT 24 mapping.

164 ERROR_MAX_THRDS_REACHED
No more process slots.

165 ERROR_MONITORS_NOT_SUPPORTED
Error with INT 24 mapping.

166 ERROR_UNC_DRIVER_NOT_INSTALLED
Default redirection return code.

167 ERROR_LOCK_FAILED
Locking failed.

168 ERROR_SWAPIO_FAILED
Swap I/O failed.

169 ERROR_SWAPIN_FAILED
Swap in failed.

170 ERROR_BUSY
Segment is busy.

171-172 Reserved.


173 ERROR_CANCEL_VIOLATION
A lock request is not outstanding for the specified file range, or the
range length is zero.

174 ERROR_ATOMIC_LOCK_NOT_SUPPORTED
The file-system driver (FSD) does not support atomic lock operations.
Versions of OS/2 prior to version 2.00 do not support atomic lock
operations.

175 ERROR_READ_LOCKS_NOT_SUPPORTED
The file system driver (FSD) does not support shared read locks.

176-179 Reserved.


180 ERROR_INVALID_SEGMENT_NUMBER
Invalid segment number.

181 ERROR_INVALID_CALLGATE
Invalid call gate.

182 ERROR_INVALID_ORDINAL
Invalid ordinal.

183 ERROR_ALREADY_EXISTS
Shared segment already exists.

184 ERROR_NO_CHILD_PROCESS
No child process to wait for.

185 ERROR_CHILD_ALIVE_NOWAIT
NoWait specified and child alive.

186 ERROR_INVALID_FLAG_NUMBER
Invalid flag number.

187 ERROR_SEM_NOT_FOUND
Semaphore does not exist.

188 ERROR_INVALID_STARTING_CODESEG
Invalid starting code segment, incorrect END (label) directive.

189 ERROR_INVALID_STACKSEG
Invalid stack segment.

190 ERROR_INVALID_MODULETYPE
Invalid module type - dynamic-link library file cannot be used as an
application. Application cannot be used as a dynamic-link library.

191 ERROR_INVALID_EXE_SIGNATURE
Invalid EXE signature - file is a DOS mode program or an improper
program.

192 ERROR_EXE_MARKED_INVALID
EXE marked invalid - link detected errors when the application was
created.

193 ERROR_BAD_EXE_FORMAT
Invalid EXE format - file is a DOS mode program or an improper
program.

194 ERROR_ITERATED_DATA_EXCEEDS_64k
Iterated data exceeds 64KB - there is more than 64KB of data in one
of the segments of the file.

195 ERROR_INVALID_MINALLOCSIZE
Invalid minimum allocation size - the size is specified to be less than
the size of the segment data in the file.

196 ERROR_DYNLINK_FROM_INVALID_RING
Dynamic link from invalid privilege level - privilege level 2 routine
cannot link to dynamic-link libraries.

197 ERROR_IOPL_NOT_ENABLED
IOPL not enabled - IOPL set to NO in CONFIG.SYS.

198 ERROR_INVALID_SEGDPL
Invalid segment descriptor privilege level - can only have privilege
levels of 2 and 3.

199 ERROR_AUTODATASEG_EXCEEDS_64k
Automatic data segment exceeds 64KB.

200 ERROR_RING2SEG_MUST_BE_MOVABLE
Privilege level 2 segment must be movable.

201 ERROR_RELOC_CHAIN_XEEDS_SEGLIM
Relocation chain exceeds segment limit.

202 ERROR_INFLOOP_IN_RELOC_CHAIN
Infinite loop in relocation chain segment.

203 ERROR_ENVVAR_NOT_FOUND
Environment variable not found.

204 ERROR_NOT_CURRENT_CTRY
Not current country.

205 ERROR_NO_SIGNAL_SENT
No signal sent - no process in the command subtree has a signal
handler.

206 ERROR_FILENAME_EXCED_RANGE
File name or extension is greater than 8.3 characters.

207 ERROR_RING2_STACK_IN_USE
Privilege level 2 stack is in use.

208 ERROR_META_EXPANSION_TOO_LONG
Meta (global) expansion is too long.

209 ERROR_INVALID_SIGNAL_NUMBER
Invalid signal number.

210 ERROR_THREAD_1_INACTIVE
Inactive thread.

211 ERROR_INFO_NOT_AVAIL
File system information is not available for this file.

212 ERROR_LOCKED
Locked error.

213 ERROR_BAD_DYNALINK
Attempted to execute a non-family API in DOS mode.

214 ERROR_TOO_MANY_MODULES
Too many modules.

215 ERROR_NESTING_NOT_ALLOWED
Nesting is not allowed.

217 ERROR_ZOMBIE_PROCESS
Zombie process.

218 ERROR_STACK_IN_HIGH_MEMORY
Stack is in high memory.

219 ERROR_INVALID_EXITROUTINE_RING
Invalid exit routine ring.

220 ERROR_GETBUF_FAILED
Get buffer failed.

221 ERROR_FLUSHBUF_FAILED
Flush buffer failed.

222 ERROR_TRANSFER_TOO_LONG
Transfer is too long.

224 ERROR_SMG_NO_TARGET_WINDOW
The application window was created without the FCF_TASKLIST
style, or the application window not yet been created or has already
been destroyed.

228 ERROR_NO_CHILDREN
No child process.

229 ERROR_INVALID_SCREEN_GROUP
Invalid session.

230 ERROR_BAD_PIPE
Non-existent pipe or invalid operation.

231 ERROR_PIPE_BUSY
Pipe is busy.

232 ERROR_NO_DATA
No data available on non-blocking read.

233 ERROR_PIPE_NOT_CONNECTED
Pipe was disconnected by server.

234 ERROR_MORE_DATA
More data is available.

240 ERROR_VC_DISCONNECTED
Session was dropped due to errors.

250 ERROR_CIRCULARITY_REQUESTED
Renaming a directory that would cause a circularity problem.

251 ERROR_DIRECTORY_IN_CDS
Renaming a directory that is in use.

252 ERROR_INVALID_FSD_NAME
Trying to access nonexistent FSD.

253 ERROR_INVALID_PATH
Invalid pseudo device.

254 ERROR_INVALID_EA_NAME
Invalid character in name, or invalid cbName.

255 ERROR_EA_LIST_INCONSISTENT
List does not match its size, or there are invalid EAs in the list.

256 ERROR_EA_LIST_TOO_LONG
FEAList is longer than 64K-1 bytes.

257 ERROR_NO_META_MATCH
String does not match expression.

259 ERROR_NO_MORE_ITEMS
DosQueryFSAttach ordinal query.

260 ERROR_SEARCH_STRUC_REUSED
DOS mode findfirst/next search structure reused.

261 ERROR_CHAR_NOT_FOUND
Character not found.

262 ERROR_TOO_MUCH_STACK
Stack request exceeds system limit.

263 ERROR_INVALID_ATTR
Invalid attribute.

264 ERROR_INVALID_STARTING_RING
Invalid starting ring.

265 ERROR_INVALID_DLL_INIT_RING
Invalid DLL INIT ring.

266 ERROR_CANNOT_COPY
Cannot copy.

267 ERROR_DIRECTORY
Used by DOSCOPY in doscall1.

268 ERROR_OPLOCKED_FILE
Oplocked file.

269 ERROR_OPLOCK_THREAD_EXISTS
Oplock thread exists.

270 ERROR_VOLUME_CHANGED
Volume changed.

271-273 Reserved.


274 ERROR_ALREADY_SHUTDOWN
System is already shut down.

275 ERROR_EAS_DIDNT_FIT
Buffer is not big enough to hold the EAs.

276 ERROR_EA_FILE_CORRUPT
EA file has been damaged.

277 ERROR_EA_TABLE_FULL
EA table is full.

278 ERROR_INVALID_EA_HANDLE
EA handle is invalid.

279 ERROR_NO_CLUSTER
No cluster.

280 ERROR_CREATE_EA_FILE
Cannot create the EA file.

281 ERROR_CANNOT_OPEN_EA_FILE
Cannot open the EA file.

282 ERROR_EAS_NOT_SUPPORTED
Destination file system does not support EAs.

283 ERROR_NEED_EAS_FOUND
Destination file system does not support EAs, and the source file's
EAs contain a need EA.

284 ERROR_DUPLICATE_HANDLE
The handle already exists.

285 ERROR_DUPLICATE_NAME
The name already exists.

286 ERROR_EMPTY_MUXWAIT
The list of semaphores in a muxwait semaphore is empty.

287 ERROR_MUTEX_OWNED
The calling thread owns one or more of the mutex semaphores in the
list.

288 ERROR_NOT_OWNER
Caller does not own the semaphore.

289 ERROR_PARAM_TOO_SMALL
Parameter is not large enough to contain all of the semaphore
records in the muxwait semaphore.

290 ERROR_TOO_MANY_HANDLES
Limit reached for number of handles.

291 ERROR_TOO_MANY_OPENS
There are too many files or semaphores open.

292 ERROR_WRONG_TYPE
Attempted to create wrong type of semaphore.

293 ERROR_UNUSED_CODE
Code is not used.

294 ERROR_THREAD_NOT_TERMINATED
Thread has not terminated.

295 ERROR_INIT_ROUTINE_FAILED
Initialization routine failed.

296 ERROR_MODULE_IN_USE
Module is in use.

297 ERROR_NOT_ENOUGH_WATCHPOINTS
There are not enough watchpoints.

298 ERROR_TOO_MANY_POSTS
Post count limit was reached for an event semaphore.

299 ERROR_ALREADY_POSTED
Event semaphore is already posted.

300 ERROR_ALREADY_RESET
Event semaphore is already reset.

301 ERROR_SEM_BUSY
Semaphore is busy.

302 Reserved


303 ERROR_INVALID_PROCID
Invalid process identity.

304 ERROR_INVALID_PDELTA
Invalid priority delta.

305 ERROR_NOT_DESCENDANT
Not descendant.

306 ERROR_NOT_SESSION_MANAGER
Requestor not session manager.

307 ERROR_INVALID_PCLASS
Invalid P class.

308 ERROR_INVALID_SCOPE
Invalid scope.

309 ERROR_INVALID_THREADID
Invalid thread identity.

310 ERROR_DOSSUB_SHRINK
Cannot shrink segment - DosSubSetMem.

311 ERROR_DOSSUB_NOMEM
No memory to satisfy request - DosSubAllocMem.

312 ERROR_DOSSUB_OVERLAP
Overlap of the specified block with a block of allocated memory -
DosSubFreeMem.

313 ERROR_DOSSUB_BADSIZE
Invalid size parameter - DosSubAllocMem or DosSubFreeMem.

314 ERROR_DOSSUB_BADFLAG
Invalid flag parameter - DosSubSetMem.

315 ERROR_DOSSUB_BADSELECTOR
Invalid segment selector.

316 ERROR_MR_MSG_TOO_LONG
Message too long for buffer.

317 ERROR_MR_MID_NOT_FOUND
Message identity number not found.

318 ERROR_MR_UN_ACC_MSGF
Unable to access message file.

319 ERROR_MR_INV_MSGF_FORMAT
Invalid message file format.

320 ERROR_MR_INV_IVCOUNT
Invalid insertion variable count.

321 ERROR_MR_UN_PERFORM
Unable to perform function.

322 ERROR_TS_WAKEUP
Unable to wake up.

323 ERROR_TS_SEMHANDLE
Invalid system semaphore.

324 ERROR_TS_NOTIMER
No timers available.

326 ERROR_TS_HANDLE
Invalid timer handle.

327 ERROR_TS_DATETIME
Date or time invalid.

328 ERROR_SYS_INTERNAL
Internal system error.

329 ERROR_QUE_CURRENT_NAME
Current queue name does not exist.

330 ERROR_QUE_PROC_NOT_OWNED
Current process does not own queue.

331 ERROR_QUE_PROC_OWNED
Current process owns queue.

332 ERROR_QUE_DUPLICATE
Duplicate queue name.

333 ERROR_QUE_ELEMENT_NOT_EXIST
Queue element does not exist.

334 ERROR_QUE_NO_MEMORY
Inadequate queue memory.

335 ERROR_QUE_INVALID_NAME
Invalid queue name.

336 ERROR_QUE_INVALID_PRIORITY
Invalid queue priority parameter.

337 ERROR_QUE_INVALID_HANDLE
Invalid queue handle.

338 ERROR_QUE_LINK_NOT_FOUND
Queue link not found.

339 ERROR_QUE_MEMORY_ERROR
Queue memory error.

340 ERROR_QUE_PREV_AT_END
Previous queue element was at end of queue.

341 ERROR_QUE_PROC_NO_ACCESS
Process does not have access to queues.

342 ERROR_QUE_EMPTY
Queue is empty.

343 ERROR_QUE_NAME_NOT_EXIST
Queue name does not exist.

344 ERROR_QUE_NOT_INITIALIZED
Queues not initialized.

345 ERROR_QUE_UNABLE_TO_ACCESS
Unable to access queues.

346 ERROR_QUE_UNABLE_TO_ADD
Unable to add new queue.

347 ERROR_QUE_UNABLE_TO_INIT
Unable to initialize queues.

349 ERROR_VIO_INVALID_MASK
Invalid function replaced.

350 ERROR_VIO_PTR
Invalid pointer to parameter.

351 ERROR_VIO_APTR
Invalid pointer to attribute.

352 ERROR_VIO_RPTR
Invalid pointer to row.

353 ERROR_VIO_CPTR
Invalid pointer to column.

354 ERROR_VIO_LPTR
Invalid pointer to length.

355 ERROR_VIO_MODE
Unsupported screen mode.

356 ERROR_VIO_WIDTH
Invalid cursor width value.

357 ERROR_VIO_ATTR
Invalid cursor attribute value.

358 ERROR_VIO_ROW
Invalid row value.

359 ERROR_VIO_COL
Invalid column value.

360 ERROR_VIO_TOPROW
Invalid TopRow value.

361 ERROR_VIO_BOTROW
Invalid BotRow value.

362 ERROR_VIO_RIGHTCOL
Invalid right column value.

363 ERROR_VIO_LEFTCOL
Invalid left column value.

364 ERROR_SCS_CALL
Call issued by other than session manager.

365 ERROR_SCS_VALUE
Value is not for save or restore.

366 ERROR_VIO_WAIT_FLAG
Invalid wait flag setting.

367 ERROR_VIO_UNLOCK
Screen not previously locked.

368 ERROR_SGS_NOT_SESSION_MGR
Caller not session manager.

369 ERROR_SMG_INVALID_SGID
Invalid session identity.

369 ERROR_SMG_INVALID_SESSION_ID
Invalid session ID.

370 ERROR_SMG_NOSG
No sessions available.

370 ERROR_SMG_NO_SESSIONS
No sessions available.

371 ERROR_SMG_GRP_NOT_FOUND
Session not found.

371 ERROR_SMG_SESSION_NOT_FOUND
Session not found.

372 ERROR_SMG_SET_TITLE
Title sent by shell or parent cannot be changed.

373 ERROR_KBD_PARAMETER
Invalid parameter to keyboard.

374 ERROR_KBD_NO_DEVICE
No device.

375 ERROR_KBD_INVALID_IOWAIT
Invalid I/O wait specified.

376 ERROR_KBD_INVALID_LENGTH
Invalid length for keyboard.

377 ERROR_KBD_INVALID_ECHO_MASK
Invalid echo mode mask.

378 ERROR_KBD_INVALID_INPUT_MASK
Invalid input mode mask.

379 ERROR_MON_INVALID_PARMS
Invalid parameters to DosMon.

380 ERROR_MON_INVALID_DEVNAME
Invalid device name string.

381 ERROR_MON_INVALID_HANDLE
Invalid device handle.

382 ERROR_MON_BUFFER_TOO_SMALL
Buffer too small.

383 ERROR_MON_BUFFER_EMPTY
Buffer is empty.

384 ERROR_MON_DATA_TOO_LARGE
Data record is too large.

385 ERROR_MOUSE_NO_DEVICE
Mouse device closed (invalid device handle).

386 ERROR_MOUSE_INV_HANDLE
Mouse device closed (invalid device handle).

387 ERROR_MOUSE_INV_PARMS
Parameters invalid for display mode.

388 ERROR_MOUSE_CANT_RESET
Function assigned and cannot be reset.

389 ERROR_MOUSE_DISPLAY_PARMS
Parameters invalid for display mode.

390 ERROR_MOUSE_INV_MODULE
Module not valid.

391 ERROR_MOUSE_INV_ENTRY_PT
Entry point not valid.

392 ERROR_MOUSE_INV_MASK
Function mask invalid.

393 NO_ERROR_MOUSE_NO_DATA
No valid data.

394 NO_ERROR_MOUSE_PTR_DRAWN
Pointer drawn.

395 ERROR_INVALID_FREQUENCY
Invalid frequency for beep.

396 ERROR_NLS_NO_COUNTRY_FILE
Cannot find COUNTRY.SYS file.

397 ERROR_NLS_OPEN_FAILED
Cannot open COUNTRY.SYS file.

398 ERROR_NLS_NO_CTRY_CODE
Country code not found.

398 ERROR_NO_COUNTRY_OR_CODEPAGE
Country code not found.

399 ERROR_NLS_TABLE_TRUNCATED
Table returned information truncated, buffer is too small.

400 ERROR_NLS_BAD_TYPE
Selected type does not exist.

401 ERROR_NLS_TYPE_NOT_FOUND
Selected type is not in file.

402 ERROR_VIO_SMG_ONLY
Valid from session manager only.

403 ERROR_VIO_INVALID_ASCIIZ
Invalid ASCIIZ length.

404 ERROR_VIO_DEREGISTER
VioDeRegister not allowed.

405 ERROR_VIO_NO_POPUP
Pop-up window not allocated.

406 ERROR_VIO_EXISTING_POPUP
Pop-up window on screen (NoWait).

407 ERROR_KBD_SMG_ONLY
Valid from session manager only.

408 ERROR_KBD_INVALID_ASCIIZ
Invalid ASCIIZ length.

409 ERROR_KBD_INVALID_MASK
Invalid replacement mask.

410 ERROR_KBD_REGISTER
KbdRegister not allowed.

411 ERROR_KBD_DEREGISTER
KbdDeRegister not allowed.

412 ERROR_MOUSE_SMG_ONLY
Valid from session manager only.

413 ERROR_MOUSE_INVALID_ASCIIZ
Invalid ASCIIZ length.

414 ERROR_MOUSE_INVALID_MASK
Invalid replacement mask.

415 ERROR_MOUSE_REGISTER
Mouse register not allowed.

416 ERROR_MOUSE_DEREGISTER
Mouse deregister not allowed.

417 ERROR_SMG_BAD_ACTION
Invalid action specified.

418 ERROR_SMG_INVALID_CALL
INIT called more than once, or invalid session identity.

419 ERROR_SCS_SG_NOTFOUND
New session number.

420 ERROR_SCS_NOT_SHELL
Caller is not shell.

421 ERROR_VIO_INVALID_PARMS
Invalid parameters passed.

422 ERROR_VIO_FUNCTION_OWNED
Save/restore already owned.

423 ERROR_VIO_RETURN
Non-destruct return (undo).

424 ERROR_SCS_INVALID_FUNCTION
Caller invalid function.

425 ERROR_SCS_NOT_SESSION_MGR
Caller not session manager.

426 ERROR_VIO_REGISTER
Vio register not allowed.

427 ERROR_VIO_NO_MODE_THREAD
No mode restore thread in SG.

428 ERROR_VIO_NO_SAVE_RESTORE_THD
No save/restore thread in SG.

429 ERROR_VIO_IN_BG
Function invalid in background.

430 ERROR_VIO_ILLEGAL_DURING_POPUP
Function not allowed during pop-up window.

431 ERROR_SMG_NOT_BASESHELL
Caller is not the base shell.

432 ERROR_SMG_BAD_STATUSREQ
Invalid status requested.

433 ERROR_QUE_INVALID_WAIT
NoWait parameter out of bounds.

434 ERROR_VIO_LOCK
Error returned from Scroll Lock.

435 ERROR_MOUSE_INVALID_IOWAIT
Invalid parameters for IOWait.

436 ERROR_VIO_INVALID_HANDLE
Invalid VIO handle.

437 ERROR_VIO_ILLEGAL_DURING_LOCK
Function not allowed during screen lock.

438 ERROR_VIO_INVALID_LENGTH
Invalid VIO length.

439 ERROR_KBD_INVALID_HANDLE
Invalid KBD handle.

440 ERROR_KBD_NO_MORE_HANDLE
Ran out of handles.

441 ERROR_KBD_CANNOT_CREATE_KCB
Unable to create kcb.

442 ERROR_KBD_CODEPAGE_LOAD_INCOMPL
Unsuccessful code-page load.

443 ERROR_KBD_INVALID_CODEPAGE_ID
Invalid code-page identity.

444 ERROR_KBD_NO_CODEPAGE_SUPPORT
No code page support.

445 ERROR_KBD_FOCUS_REQUIRED
Keyboard focus required.

446 ERROR_KBD_FOCUS_ALREADY_ACTIVE
Calling thread has an outstanding focus.

447 ERROR_KBD_KEYBOARD_BUSY
Keyboard is busy.

448 ERROR_KBD_INVALID_CODEPAGE
Invalid code page.

449 ERROR_KBD_UNABLE_TO_FOCUS
Focus attempt failed.

450 ERROR_SMG_SESSION_NON_SELECT
Session is not selectable.

451 ERROR_SMG_SESSION_NOT_FOREGRND
Parent/child session is not foreground.

452 ERROR_SMG_SESSION_NOT_PARENT
Not parent of requested child.

453 ERROR_SMG_INVALID_START_MODE
Invalid session start mode.

454 ERROR_SMG_INVALID_RELATED_OPT
Invalid session start related option.

455 ERROR_SMG_INVALID_BOND_OPTION
Invalid session bond option.

456 ERROR_SMG_INVALID_SELECT_OPT
Invalid session select option.

457 ERROR_SMG_START_IN_BACKGROUND
Session started in background.

458 ERROR_SMG_INVALID_STOP_OPTION
Invalid session stop option.

459 ERROR_SMG_BAD_RESERVE
Reserved parameters are not zero.

460 ERROR_SMG_PROCESS_NOT_PARENT
Session parent process already exists.

461 ERROR_SMG_INVALID_DATA_LENGTH
Invalid data length.

462 ERROR_SMG_NOT_BOUND
Parent is not bound.

463 ERROR_SMG_RETRY_SUB_ALLOC
Retry request block allocation.

464 ERROR_KBD_DETACHED
This call is not allowed for a detached PID.

465 ERROR_VIO_DETACHED
This call is not allowed for a detached PID.

466 ERROR_MOU_DETACHED
This call is not allowed for a detached PID.

467 ERROR_VIO_FONT
No font is available to support the mode.

468 ERROR_VIO_USER_FONT
User font is active.

469 ERROR_VIO_BAD_CP
Invalid code page specified.

470 ERROR_VIO_NO_CP
System displays do not support code page.

471 ERROR_VIO_NA_CP
Current display does not support code page.

472 ERROR_INVALID_CODE_PAGE
Invalid code page.

473 ERROR_CPLIST_TOO_SMALL
Code page list is too small.

474 ERROR_CP_NOT_MOVED
Code page was not moved.

475 ERROR_MODE_SWITCH_INIT
Mode switch initialization error.

476 ERROR_CODE_PAGE_NOT_FOUND
Code page was not found.

477 ERROR_UNEXPECTED_SLOT_RETURNED
Internal error.

478 ERROR_SMG_INVALID_TRACE_OPTION
Invalid start session trace indicator.

479 ERROR_VIO_INTERNAL_RESOURCE
VIO internal resource error.

480 ERROR_VIO_SHELL_INIT
VIO shell initialization error.

481 ERROR_SMG_NO_HARD_ERRORS
No session manager hard errors.

482 ERROR_CP_SWITCH_INCOMPLETE
DosSetProcessCp is unable to set a KBD or VIO code page.

483 ERROR_VIO_TRANSPARENT_POPUP
Error during VIO pop-up window.

484 ERROR_CRITSEC_OVERFLOW
Critical section overflow.

485 ERROR_CRITSEC_UNDERFLOW
Critical section underflow.

486 ERROR_VIO_BAD_RESERVE
Reserved parameter is not zero.

487 ERROR_INVALID_ADDRESS
Invalid physical address.

488 ERROR_ZERO_SELECTORS_REQUESTED
At least one selector must be requested.

489 ERROR_NOT_ENOUGH_SELECTORS_AVA
Not enough GDT selectors to satisfy request.

490 ERROR_INVALID_SELECTOR
Not a GDT selector.

491 ERROR_SMG_INVALID_PROGRAM_TYPE
Invalid program type.

492 ERROR_SMG_INVALID_PGM_CONTROL
Invalid program control.

493 ERROR_SMG_INVALID_INHERIT_OPT
Invalid inherit option.

494 ERROR_VIO_EXTENDED_SG


495 ERROR_VIO_NOT_PRES_MGR_SG


496 ERROR_VIO_SHIELD_OWNED


497 ERROR_VIO_NO_MORE_HANDLES


498 ERROR_VIO_SEE_ERROR_LOG


499 ERROR_VIO_ASSOCIATED_DC


500 ERROR_KBD_NO_CONSOLE


501 ERROR_MOUSE_NO_CONSOLE


502 ERROR_MOUSE_INVALID_HANDLE


503 ERROR_SMG_INVALID_DEBUG_PARMS


504 ERROR_KBD_EXTENDED_SG


505 ERROR_MOU_EXTENDED_SG


506 ERROR_SMG_INVALID_ICON_FILE


507 ERROR_TRC_PID_NON_EXISTENT


508 ERROR_TRC_COUNT_ACTIVE


509 ERROR_TRC_SUSPENDED_BY_COUNT


510 ERROR_TRC_COUNT_INACTIVE


511 ERROR_TRC_COUNT_REACHED


512 ERROR_NO_MC_TRACE


513 ERROR_MC_TRACE


514 ERROR_TRC_COUNT_ZERO


515 ERROR_SMG_TOO_MANY_DDS


516 ERROR_SMG_INVALID_NOTIFICATION


517 ERROR_LF_INVALID_FUNCTION


518 ERROR_LF_NOT_AVAIL


519 ERROR_LF_SUSPENDED


520 ERROR_LF_BUF_TOO_SMALL


521 ERROR_LF_BUFFER_CORRUPTED


521 ERROR_LF_BUFFER_FULL


522 ERROR_LF_INVALID_DAEMON


522 ERROR_LF_INVALID_RECORD


523 ERROR_LF_INVALID_TEMPL


523 ERROR_LF_INVALID_SERVICE


524 ERROR_LF_GENERAL_FAILURE


525 ERROR_LF_INVALID_ID


526 ERROR_LF_INVALID_HANDLE


527 ERROR_LF_NO_ID_AVAIL


528 ERROR_LF_TEMPLATE_AREA_FULL


529 ERROR_LF_ID_IN_USE


530 ERROR_MOU_NOT_INITIALIZED


531 ERROR_MOUINITREAL_DONE


532 ERROR_DOSSUB_CORRUPTED


533 ERROR_MOUSE_CALLER_NOT_SUBSYS


534 ERROR_ARITHMETIC_OVERFLOW


535 ERROR_TMR_NO_DEVICE


536 ERROR_TMR_INVALID_TIME


537 ERROR_PVW_INVALID_ENTITY


538 ERROR_PVW_INVALID_ENTITY_TYPE


539 ERROR_PVW_INVALID_SPEC


540 ERROR_PVW_INVALID_RANGE_TYPE


541 ERROR_PVW_INVALID_COUNTER_BLK


542 ERROR_PVW_INVALID_TEXT_BLK


543 ERROR_PRF_NOT_INITIALIZED


544 ERROR_PRF_ALREADY_INITIALIZED


545 ERROR_PRF_NOT_STARTED


546 ERROR_PRF_ALREADY_STARTED


547 ERROR_PRF_TIMER_OUT_OF_RANGE


548 ERROR_PRF_TIMER_RESET


639 ERROR_VDD_LOCK_USEAGE_DENIED


640 ERROR_TIMEOUT


641 ERROR_VDM_DOWN


642 ERROR_VDM_LIMIT


643 ERROR_VDD_NOT_FOUND


644 ERROR_INVALID_CALLER


645 ERROR_PID_MISMATCH


646 ERROR_INVALID_VDD_HANDLE


647 ERROR_VLPT_NO_SPOOLER


648 ERROR_VCOM_DEVICE_BUSY


649 ERROR_VLPT_DEVICE_BUSY


650 ERROR_NESTING_TOO_DEEP


651 ERROR_VDD_MISSING


691 ERROR_IMP_INVALID_PARM


692 ERROR_IMP_INVALID_LENGTH


693 MSG_HPFS_DISK_ERROR_WARN


730 ERROR_MON_BAD_BUFFER


731 ERROR_MODULE_CORRUPTED


2055 ERROR_LF_TIMEOUT


2057 ERROR_LF_SUSPEND_SUCCESS


2058 ERROR_LF_RESUME_SUCCESS


2059 ERROR_LF_REDIRECT_SUCCESS


2060 ERROR_LF_REDIRECT_FAILURE


32768 ERROR_SWAPPER_NOT_ACTIVE


32769 ERROR_INVALID_SWAPID


32770 ERROR_IOERR_SWAP_FILE


32771 ERROR_SWAP_TABLE_FULL


32772 ERROR_SWAP_FILE_FULL


32773 ERROR_CANT_INIT_SWAPPER


32774 ERROR_SWAPPER_ALREADY_INIT


32775 ERROR_PMM_INSUFFICIENT_MEMORY


32776 ERROR_PMM_INVALID_FLAGS


32777 ERROR_PMM_INVALID_ADDRESS


32778 ERROR_PMM_LOCK_FAILED


32779 ERROR_PMM_UNLOCK_FAILED


32780 ERROR_PMM_MOVE_INCOMPLETE


32781 ERROR_UCOM_DRIVE_RENAMED


32782 ERROR_UCOM_FILENAME_TRUNCATED


32783 ERROR_UCOM_BUFFER_LENGTH


32784 ERROR_MON_CHAIN_HANDLE


32785 ERROR_MON_NOT_REGISTERED


32786 ERROR_SMG_ALREADY_TOP


32787 ERROR_PMM_ARENA_MODIFIED


32788 ERROR_SMG_PRINTER_OPEN


32789 ERROR_PMM_SET_FLAGS_FAILED


32790 ERROR_INVALID_DOS_DD


32791 ERROR_BLOCKED


32792 ERROR_NOBLOCK


32793 ERROR_INSTANCE_SHARED


32794 ERROR_NO_OBJECT


32795 ERROR_PARTIAL_ATTACH


32796 ERROR_INCACHE


32797 ERROR_SWAP_IO_PROBLEMS


32798 ERROR_CROSSES_OBJECT_BOUNDARY


32799 ERROR_LONGLOCK


32800 ERROR_SHORTLOCK


32801 ERROR_UVIRTLOCK


32802 ERROR_ALIASLOCK


32803 ERROR_ALIAS


32804 ERROR_NO_MORE_HANDLES


32805 ERROR_SCAN_TERMINATED


32806 ERROR_TERMINATOR_NOT_FOUND


32807 ERROR_NOT_DIRECT_CHILD


32808 ERROR_DELAY_FREE


32809 ERROR_GUARDPAGE


32900 ERROR_SWAPERROR


32901 ERROR_LDRERROR


32902 ERROR_NOMEMORY


32903 ERROR_NOACCESS


32904 ERROR_NO_DLL_TERM


65026 ERROR_CPSIO_CODE_PAGE_INVALID


65027 ERROR_CPSIO_NO_SPOOLER


65028 ERROR_CPSIO_FONT_ID_INVALID


65033 ERROR_CPSIO_INTERNAL_ERROR


65034 ERROR_CPSIO_INVALID_PTR_NAME


65037 ERROR_CPSIO_NOT_ACTIVE


65039 ERROR_CPSIO_PID_FULL


65040 ERROR_CPSIO_PID_NOT_FOUND


65043 ERROR_CPSIO_READ_CTL_SEQ


65045 ERROR_CPSIO_READ_FNT_DEF


65047 ERROR_CPSIO_WRITE_ERROR


65048 ERROR_CPSIO_WRITE_FULL_ERROR


65049 ERROR_CPSIO_WRITE_HANDLE_BAD


65074 ERROR_CPSIO_SWIT_LOAD


65077 ERROR_CPSIO_INV_COMMAND


65078 ERROR_CPSIO_NO_FONT_SWIT


65079 ERROR_ENTRY_IS_CALLGATE


________________________________________________________________________________________________________
(Aow Saudade) Clipper 5.2e, Blinker 7, RDD SIXNSX, DBFCDX /Xharbour 1.0, Rdd Mediator (Mysql) Free , RDD Sqlrdd (Sql Server) Comercial
(Hoje) C# Python Sql Server e Oracle




Avatar de usuário

Dudu_XBase
Membro Master

Membro Master
 
Mensagens: 1042
Data de registro: 25 Ago 2003 16:55
Cidade/Estado: São Paulo-SP
Curtiu: 19 vezes
Mens.Curtidas: 4 vezes



Retornar para Contribuições, Dicas e Tutoriais

Quem está online

Usuários vendo este fórum: Nenhum usuário registrado online e 2 visitantes


Ola Amigo, espero que meu site e forum tem lhe beneficiado, com exemplos e dicas de programacao.
Entao divulgue o link da Doacao abaixo para seus amigos e redes sociais ou faça uma doacao para o site forum...
MUITO OBRIGADO PELA SUA DOACAO!
Faça uma doação para o forum
v
Olá visitante, seja bem-vindo ao Fórum Clipper On Line!
Efetue o seu login ou faça o seu Registro